Home   |   Contact Us
 

CATALOG  |  HOW TO BUY  |  ABOUT US
             
  >Home >Catalog>Pro-Tech 7080        
             
  Pro-Tech 7080  
  Hardwire Carbon Monoxide Alarm  
             
 

  The PRO-TECH 7080 Hardwire CO Detectors are simple to operate. When a chronic CO level of 70 ppm or more is detected, a Red LED lights and built-in 85db pulsating alarm sounds. The reset button temporarily mutes the audible signal while the CO level is rechecked.

If carbon monoxide remains at alarm levels, the visual and audible signals are automatically reactivated. After ventilation, the LED is auto-reset to Green (power on), the audible signal is silenced, and detection restarts.

SPECIAL FEATURE: The Pro-Tech 7080 Hardwire CO Detectors include an integral restraining flange which secures the alarm to the universal mounting plate (included).
  
             
             
 

Alarm Basics

• 120vAC Carbon Monoxide Alarm
• Hardwire
• Tamper Resistant
• Semiconductor Sensor
• Samples every 2½ minutes
• Steady Green LED Power Signal
• Instant Test/Reset Feature
• Self-Diagnostic Circuitry
• Operating Temperature 32°F to 120°F
• Case Color White
• Case Size 5" x 3¾" x 1¾"

Certifications/Standards and Warranty

• ANSI/UL 2034-05 Listed
• CSA 6.19-01/IAS 6-96 2nd Ed. Certified
• NFPA 720-05 Compliant
• Blue Star and Blue Flame Certified
• 5 Year Limited Factory Warranty

 

  

Alarm Signals

• Chronic Alarm Time - 70ppm @ 60-240 minutes
• Acute Alarm Time - 400ppm @ 4-15 minutes
• Red Alarm LED
• 85dB Pulsating Alarm - 4 Beeps Every 6 Seconds
• Unit Malfunction - 1 Beep Per Minute; Flashing Red/Green LED

Security Features

• Tamper Resistant
• Integral Restraining Flange
• Universal Mounting Plate


  
             
             
   Copyright © 2011 Protech Safety. All Rights Reserved

Site Map  |  About Us  |  Contact Us  |  Catalog  |  How To Buy